Ricci Posted January 11, 2016 Author Share Posted January 11, 2016 January 2016 Updated for sale list... I'm in the Louisville KY metro area. No international shipping. All equipment is used and may have a few cosmetic blemishes, etc... but is otherwise in correct functional shape.2 RE AudioXXX 18d2's Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $550ea shipped or $450 each local pickup. I will drive a bit to meet. Chane Audio SBE-118 and a Chane VBE-118. Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup only. $175 each. I will drive to meet.BMS 18n862 18's. 1 pair. Low distortion with excellent all around performance. Little bit of oxidation on the motors. $450 each shipped. $400 each local pickup. B&C 21 IPAL's. 1 pair. Barely used at all. $900 each shipped. $825 each local pickup. Will drive to meet. SOLD!!! TC Sounds LMS 5400 18. SOLD!!!! Working condition. This one has a surround glue joint which has been repaired. The surround detached from the cone after heating up in the summer sun. Has been re-glued with Loctite 416 rubberized glue. It is NOT pretty but it functions 10/10. The measurement data for the LMS driver posted here were taken from this driver AFTER it was repaired so rest assured it functions just fine. Will post a few pics when I get a chance. Would be a good choice if the driver is to be downfired, behind a grille, or in a horn. Have the original packaging. $650 shipped. $550 local pickup. Will drive to meet. SOLD!!!! Rockford Fosgate T3S2-19. Basically new. Bought and tested. Factory packaging. $1350 shipped. $1250 local pickup. Will drive to meet. SOLD! Dayton Audio UM18-22 SOLD! New in box. Never even opened the packaging yet. $240 shipped. SOLD! Quote Link to comment Share on other sites More sharing options...
MemX Posted January 11, 2016 Share Posted January 11, 2016 Those XXXs are a steal at that price. Last time I saw them on Amazon they were going for $900+. Quote Link to comment Share on other sites More sharing options...
Ricci Posted February 11, 2016 Author Share Posted February 11, 2016 The 5400 just got bought and the Dayton UM18 is gone. Still available. BMS 18N862's B&C 21IPAL's RE Audio XXX 18d2 v2's Rockford T3S2-19 Chane SBE-118 Chane VBE-118 Quote Link to comment Share on other sites More sharing options...
d_c Posted February 11, 2016 Share Posted February 11, 2016 Hey Ricci, you mentioned the xxx would perform better in a larger sealed. What size did you have in mind? I'm helping out a friend with a nearfield sub and am hoping to use one of these little fellas you have here. Quote Link to comment Share on other sites More sharing options...
Infrasonic Posted February 11, 2016 Share Posted February 11, 2016 I'd go no lower than 8cuft (also slightly depends on split-coil or overhung version) but I'd shoot for 10-12cuft at the least. Quote Link to comment Share on other sites More sharing options...
d_c Posted February 11, 2016 Share Posted February 11, 2016 I'd go no lower than 8cuft (also slightly depends on split-coil or overhung version) but I'd shoot for 10-12cuft at the least. It's for the overhung version he has for sale above and It needs to get up to the back of the middle of the chair sitting on a riser, so that is perfect. And no, Scott, an ass-fire riser mounted sub is not an option! We are debating less sub and small amp vs. beastie sub and big amp. He just wants the one driver so the xxx is my first choice for the price. Quote Link to comment Share on other sites More sharing options...
Infrasonic Posted February 11, 2016 Share Posted February 11, 2016 Haha. Would have to be quite a tall riser had you were interested in the ass-fire setup. Yep. That's why I would go 10-12cuft at the least. Quote Link to comment Share on other sites More sharing options...
Ricci Posted February 11, 2016 Author Share Posted February 11, 2016 The overhung version has quite a lot more motor force than the split coil so it works in a smaller box. It doesn't model like the split coil version. 6 to 8 cubes should be just fine. Quote Link to comment Share on other sites More sharing options...
BeastAudio Posted February 19, 2016 Share Posted February 19, 2016 I'd go no lower than 8cuft (also slightly depends on split-coil or overhung version) but I'd shoot for 10-12cuft at the least. Hey Ricci, you mentioned the xxx would perform better in a larger sealed. What size did you have in mind? I'm helping out a friend with a nearfield sub and am hoping to use one of these little fellas you have here. The overhung version has quite a lot more motor force than the split coil so it works in a smaller box. It doesn't model like the split coil version. 6 to 8 cubes should be just fine. That's really good to know. I was dumping all a sanway clone could give to my pair of split coils in 8 cuft boxes and they just laughed at it and kept asking for more. It's good to see they remedied that somewhat with the overhung design. Quote Link to comment Share on other sites More sharing options...
Infrasonic Posted February 23, 2016 Share Posted February 23, 2016 Sold! Any one interesting in getting into immersive audio? I've got an item for sale. In like-new condition. Includes everything with original box. Trading up on this 6 month old unit to the Yamaha CX-A5100. Works great, sounds great!Product information: http://usa.yamaha.com/products/audio...a3050_black_u/Only six months old. Has all the modern bells and whistles including 7.1.4 support for Dolby Atmos. DTS:X update due in March 2016.Still goes for ~$2,000 new. Asking $1,400 shipped to the lower 48 states. Accepting Paypal, no fees required. Quote Link to comment Share on other sites More sharing options...
Kyle Posted April 1, 2016 Share Posted April 1, 2016 I have 4 BNIB TC Pro 5100's Never fired up! Was planing to keep these for a while but its time to give the up now. These are the drivers I helped design while I worked at TC Sounds and are some of my all time favorite woofers! I would like to get 1k for each. Quote Link to comment Share on other sites More sharing options...
Infrasonic Posted April 5, 2016 Share Posted April 5, 2016 Why you no use deez??!?!?!?!?!?!? Quote Link to comment Share on other sites More sharing options...
Ricci Posted April 6, 2016 Author Share Posted April 6, 2016 Maybe he has 36 of them and can only run 32... Quote Link to comment Share on other sites More sharing options...
Infrasonic Posted April 6, 2016 Share Posted April 6, 2016 Maybe he has 36 of them and can only run 32... 1 Quote Link to comment Share on other sites More sharing options...
Ricci Posted May 9, 2016 Author Share Posted May 9, 2016 MAY 2016 Updated for sale list... I'm in the Louisville KY metro area. No international shipping. All equipment is used and may have a few cosmetic blemishes, etc... but is otherwise in correct functional shape. Aurasound NS18-994-A Bought last year. Tested. Needs a good home. Good condition. $450 shipped or $400 local pickup. I will drive a bit to meet. SOLD!!! JL Audio 10W3v2 SOLD !!!! Pulled out of my stealthbox in my Jeep WJ. Needs a good home. Good condition. $40 + shipping or $40 local pickup. 2 RE AudioXXX 18d2's Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $475ea shipped or $400 each local pickup. I will drive a bit to meet. SOLD!!! Chane Audio SBE-118 and a Chane VBE-118. SOLD!!! Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup preferred. $100 each! I will drive a bit to meet provided gas is covered. Someone PLEASE take these! I'll ship these if someone pays the shipping! Does anyone know a broke, young or otherwise financially strapped person who can't afford much? This is basically charity at this point. Anyone know of a struggling audio enthusiast in need? BMS 18n862 18's. 1 pair. Low distortion with excellent all around performance. Little bit of oxidation on the motors. $450 each shipped. $400 each local pickup. B&C 21 IPAL's. 1 pair. Barely used at all. $850 each shipped. $750 each local pickup. Will drive to meet. RF T3S2-19 No longer for sale. I'm keeping my baby. 1 Quote Link to comment Share on other sites More sharing options...
MemX Posted May 11, 2016 Share Posted May 11, 2016 2 RE AudioXXX 18d2's Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $475ea shipped or $400 each local pickup. I will drive a bit to meet. Chane Audio SBE-118 and a Chane VBE-118. Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup preferred. $100 each! I will drive a bit to meet provided gas is covered. Someone PLEASE take these! I'll ship these if someone pays the shipping! Does anyone know a broke, young or otherwise financially strapped person who can't afford much? This is basically charity at this point. Anyone know of a struggling audio enthusiast in need? Awesome offers on these It's a shame there's a rather large pond in the way as I'm sure I could find the money and a home for the latter! JL Audio 10W3v2 Pulled out of my stealthbox in my Jeep WJ. Needs a good home. Good condition. $40 + shipping or $40 local pickup. Hmmm... I have one of these sitting in a small sealed boombox that used to be in a car... I wonder if I could make a small PPSL if I bought this one? I recall they sounded pretty good... Quote Link to comment Share on other sites More sharing options...
Ricci Posted May 11, 2016 Author Share Posted May 11, 2016 Hmmm... I have one of these sitting in a small sealed boombox that used to be in a car... I wonder if I could make a small PPSL if I bought this one? I recall they sounded pretty good... Yeah mine served faithfully for many years on an amplifier with about 3x the rms rating of the driver. Still works fine. Not a bad driver at all. It just isn't worth much. I'm trying to find homes for all of this equipment I've got collecting dust. Quote Link to comment Share on other sites More sharing options...
EndersShadow Posted May 12, 2016 Share Posted May 12, 2016 Ricci I need your contact info. I know a guy in Eberfeld IN who will take both your Chanes and your JL sub. He will contact you and make arrangements to have hen picked up tomorrow Quote Link to comment Share on other sites More sharing options...
Ricci Posted May 14, 2016 Author Share Posted May 14, 2016 Thanks for helping with the sale EndersShadow. 1 Quote Link to comment Share on other sites More sharing options...
EndersShadow Posted May 14, 2016 Share Posted May 14, 2016 No worries mate. I'm slightly jealous of my buddy for getting them lol. I take it they got picked up today? 1 Quote Link to comment Share on other sites More sharing options...
Ricci Posted May 16, 2016 Author Share Posted May 16, 2016 No worries mate. I'm slightly jealous of my buddy for getting them lol. I take it they got picked up today? He had everything on hand by Saturday night. Some serious team work on that sale, with 4 parties involved. Went super smooth. 1 Quote Link to comment Share on other sites More sharing options...
EndersShadow Posted May 16, 2016 Share Posted May 16, 2016 ^yeah he sent me pictures of em later that day. He's got em sanded down and repainted already lol... I will prob be headed down there in a few weeks myself for a unrelated sub project and look forward to seeing/hearing them! PS I'm currently passing through Louisville ironically enough Quote Link to comment Share on other sites More sharing options...
EndersShadow Posted May 16, 2016 Share Posted May 16, 2016 Posting from the car sucks lol... Ignore me Quote Link to comment Share on other sites More sharing options...
Kyle Posted May 17, 2016 Share Posted May 17, 2016 I have 4 BNIB TC Pro 5100's Never fired up! Was planing to keep these for a while but its time to give the up now. These are the drivers I helped design while I worked at TC Sounds and are some of my all time favorite woofers! I would like to get 1k for each. Lowering price to 900 Quote Link to comment Share on other sites More sharing options...
chrapladm Posted May 30, 2016 Share Posted May 30, 2016 Dangit I wish I had the funds for these Kyle. Would love to have a pair of these. I was hoping to own a pair of these in the future. Seems like a perfect driver for my own personal wants. I hope you sell them but I am also hoping you have a pair of them down the road still. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.