Jump to content


Photo

(8) Sealed Incriminator Audio Judge 21" build


  • Please log in to reply
458 replies to this topic

#21 Rowan611

Rowan611

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 158 posts
  • LocationPella, IA

Posted 24 December 2015 - 06:07 PM

I had some issues with the gasket tape I had so I had to buy some more yesterday.  Right now I only have one cabinet loaded and I doubt I'll have the other 3 done today.  I woke up with a cold so it's slowing me down, and we have plans for the kiddos today.


Sorry you're not feeling well man. Have fun with the kids. We leave on Saturday and won't be back until the 1st (more than likely). I'm sure you'll have them done and set by then; sorry I won't be around to help.

#22 cellarnoise

cellarnoise

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 24 December 2015 - 06:51 PM

Looking forward to hearing your impressions and your ulf amp tests!
  • lukeamdman likes this

#23 chrapladm

chrapladm

    Ultra Member

  • Members
  • PipPipPipPipPipPip
  • 269 posts
  • LocationAdelaide, South Australia

Posted 25 December 2015 - 01:04 AM

i had used 3/4" tape on my 21's. I also had some 1" tape that I have been using ever since. That is 1" wide tape. I am sure you know what your doing so just adding what worked for me.


"Music is not in the notes, but in the silence between."


#24 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 25 December 2015 - 01:06 AM

i had used 3/4" tape on my 21's. I also had some 1" tape that I have been using ever since. That is 1" wide tape. I am sure you know what your doing so just adding what worked for me.


I ended up using 1" as well.
  • chrapladm likes this

#25 Rod2486

Rod2486

    Newbie

  • Members
  • Pip
  • 2 posts

Posted 25 December 2015 - 07:30 AM

Looks uber nice. I would say I am a bit jealous :D



#26 dgage

dgage

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 195 posts

Posted 26 December 2015 - 02:43 AM

Looking great lukeamdman!  I hear Minnesota is nice during the summer...sounds like the family needs a road trip. :)  I've been meaning to visit the badlands too, which makes you're place not too far off the beaten path. :)

 

What do you have as mains to try to keep up with those monsters?  And I expect you'll get tons of sub-10 Hz output!


David Gage
Deep Sea Sound
"You don't listen to our subs, you EXPERIENCE them!"


#27 chrapladm

chrapladm

    Ultra Member

  • Members
  • PipPipPipPipPipPip
  • 269 posts
  • LocationAdelaide, South Australia

Posted 26 December 2015 - 03:22 AM

Looking great lukeamdman!  I hear Minnesota is nice during the summer...sounds like the family needs a road trip. :)  I've been meaning to visit the badlands too, which makes you're place not too far off the beaten path. :)

 

What do you have as mains to try to keep up with those monsters?  And I expect you'll get tons of sub-10 Hz output!

I think he had some little 3 way's. :D


  • lukeamdman likes this

"Music is not in the notes, but in the silence between."


#28 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 26 December 2015 - 05:19 AM

Looking great lukeamdman!  I hear Minnesota is nice during the summer...sounds like the family needs a road trip. :)  I've been meaning to visit the badlands too, which makes you're place not too far off the beaten path. :)

 

What do you have as mains to try to keep up with those monsters?  And I expect you'll get tons of sub-10 Hz output!

 

Definitely let me know if you're ever in the area!

 

My mains get the job done, but barely:

 

http://www.avsforum....l-ae-td18h.html


  • chrapladm likes this

#29 dgage

dgage

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 195 posts

Posted 26 December 2015 - 08:42 PM

Barely huh? :D

I love that coax and have read lots of praise about the TDH drivers. How do you like them and where did you end up putting the crossover?

David Gage
Deep Sea Sound
"You don't listen to our subs, you EXPERIENCE them!"


#30 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 26 December 2015 - 09:43 PM

Barely huh? :D

I love that coax and have read lots of praise about the TDH drivers. How do you like them and where did you end up putting the crossover?

 

I think they turned out really well!  They have solid extension to the high teens and seem to handle anything thrown at them with ease. 

 

Crossover point is 450hz.



#31 Infrasonic

Infrasonic

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 778 posts

Posted 20 January 2016 - 05:53 AM

*ahem*

 

Why is it so quiet in here?

 

BKrLXnr.gif



#32 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 20 January 2016 - 03:01 PM

*ahem*

 

Why is it so quiet in here?

 

BKrLXnr.gif

 

 

Well, I won't go into much detail right now, but things took a very unexpected turn to say the least. 

 

Next week I'll have an update, which should include plenty of pictures of everything finally put together, and some SPL/excursion videos :)



#33 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 20 January 2016 - 04:56 PM

I’ll also add that there is a reason I haven’t posted any details yet which I’ll explain later.  For now I’ll just say that I don’t want to incriminate myself and be judged because of it :D  :D :D  



#34 Rowan611

Rowan611

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 158 posts
  • LocationPella, IA

Posted 20 January 2016 - 05:04 PM

Lol...Awesome.
  • lukeamdman likes this

#35 Infrasonic

Infrasonic

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 778 posts

Posted 20 January 2016 - 06:32 PM

Couldn't make it two whole hours before.....

 

I guess we will have to wait so then we can judge your little project here. :P


  • lukeamdman likes this

#36 dgage

dgage

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 195 posts

Posted 21 January 2016 - 05:07 AM

I’ll also add that there is a reason I haven’t posted any details yet which I’ll explain later.  For now I’ll just say that I don’t want to incriminate myself and be judged because of it :D  :D :D  

 

Whatever you did I'm sure it was wrong.  You should have gone sealed if you went ported and you should have gone ported if you went sealed.  And don't get me started if you decided to do some sort of horn loaded sub.  What were you thinking?  And why did you use MDF when you obviously should have used Baltic Birch plywood?  LOL!  Sorry.  Was just warming up for the festivities. :D


  • lukeamdman likes this

David Gage
Deep Sea Sound
"You don't listen to our subs, you EXPERIENCE them!"


#37 maxmercy

maxmercy

    Super Bass Overlord

  • Moderators
  • 1,832 posts
  • LocationNW FL

Posted 21 January 2016 - 09:41 PM

There is only IB. 

 

JSS


  • dgage likes this

#38 lukeamdman

lukeamdman

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 829 posts
  • LocationBurnsville, MN

Posted 21 January 2016 - 10:22 PM

Well, Ricci will be updating the thread title, so this won't be a mystery much longer!


  • tuxedocivic likes this

#39 Infrasonic

Infrasonic

    Bass Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 778 posts

Posted 21 January 2016 - 10:52 PM

There is only IB. 

 

JSS

 

If only...

 

Not a good option afaik for Luke. Plus, he put a lot of time and work into those cabs that I'm sure he wants to use still.

 

Well, Ricci will be updating the thread title, so this won't be a mystery much longer!

 

So it will soon be (8) Sealed somethingorother build. Sweet.


  • Electrodynamic likes this

#40 Rowan611

Rowan611

    Super Power Member

  • Members
  • PipPipPipPipPip
  • 158 posts
  • LocationPella, IA

Posted 22 January 2016 - 02:25 PM

Still using the cabs he built.
  • lukeamdman likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users