Mattias Andersson Posted September 14, 2018 Share Posted September 14, 2018 Hey everyone, first I would like to thank you all members of this forum, you have inspired me to build myself some speakers. I also like to say, thank you Ricci for sharing the Othorn plan and giving all your support to me as a diy. As you probably know by now I will start to build Othorns to make my soundsystem complete. We are right in the beginning of this project, the speakers arrived today and the building start is not yet set. My goal with this build is to make the Othorns to look like the rest of the sound system. Please feel free to guide me through this project, ask for pictures if you like. I will gladly share this building project with you guys, you have giving me so much and I'll like to give something back in return. //Mattias Link to comment Share on other sites More sharing options...
Mattias Andersson Posted September 14, 2018 Author Share Posted September 14, 2018 Ooops...two identical pics. Okay then ill build two Othorns. Hehe Link to comment Share on other sites More sharing options...
Mattias Andersson Posted September 25, 2018 Author Share Posted September 25, 2018 Today's to-do is to calculate inches to millimeters. If you take a closer look at sheet 4 and sheet 5 there are some measurements typed too close to each other on the plan, could someone please tell me what it says. Link to comment Share on other sites More sharing options...
Ricci Posted September 25, 2018 Share Posted September 25, 2018 The plans are made in Solidworks. That is why everything is too detailed. They dont need to be down to the 3rd decimal. Some rounding is expected. Are you trying to cnc it? If not sketch out the path on a side panel. Link to comment Share on other sites More sharing options...
Mattias Andersson Posted September 25, 2018 Author Share Posted September 25, 2018 We will made some parts in the cnc. Is it more preferable to cnc all parts? Could you help me to sort out the numbers in the picture. Have a look at sheet 4 in the lower corner, numbers are also unclear in the top right corner of the side panel. Link to comment Share on other sites More sharing options...
Ricci Posted September 26, 2018 Share Posted September 26, 2018 Check the Othorn files again. I put the original print in there. The dimensioning is clearer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.