rolo95

Im not shure but the ashly proteas and even the peavey digital ones suppose to be better than the DBX entry level, thing is that not anybody can tell the difference on a blind test on a live setup,i wish to have an XTA or BSS lol., there is an EV and a mackie processor also and many guys still use the behringer unit, so i cant tell by myself as i only have the old driverack PA.

no worries man, my current lineup is 1 PLX 3002, 1 XLS 2500 and 1 XLS 2000 , on a dbx driverack pa ( the old one ) i read that even the behringer 2496 is better in the limiters than the dbx pa, what about the miniDSP i have 4 b52 EV l36 clones that i need to get rid off, i got that from a guy who do not want to DJ anymore and i get that around 2013, i did not know anything at the time, then start reading the DIY forums and now i know that the dbx pa suck and the b52 subs suck more., lol. so i need to get something else btw, the tops were some 80's jbl MR925's 4 of them, they are heavy as F... so i want to change that also anyway... i need to start from somewhere , cant get rid of all and left without any workable rig if i had the dough , i think i will get SH50's for tops and tell somebody to build 8 skrams 4 me with Lab gruppen , for now CVR amplification lol when i swap the old amps

I guess, no wonder a danley TH118 are so expensive not to say we are paying the R&D but the 850USD drivers Speaking of vented cabs, i was looking that the QSC driver in the SP218 SB7218 WL218 GP118W GP218SW subs sells for 144 https://www.fullcompass.com/prod/594076-qsc-xd-000110-02-18-woofer-for-sp218-sb7218-wl218-gp118w-gp218sw just to get the measurments of one of those boxes and make some

https://www.parts-express.com/LaVoce-SAN214.50-21-Neodymium-Subwoofer-8-Ohm-293-732 667 as of now to be exact, if if go with the LaVoce, what would be my limiter settings, i saw a guy who put a 60hz signal in to it and with an RMS fluke AC meter , he adjusted until the voltage was what he want, then adjusted the limiter so no matter how much you raised the fader on the mixer mains, you never go above whatever voltage you agree with.

Hey Jay, thanks for the reply do you have any experience with Sanway ? and.. AYyyyy https://reverb.com/item/19924547-xta-dpa-100-dual-amplifier-with-xta-processing those are not in my league for now, what would be a decent limiter, i have an old Driverack PA, not the PA2, not the 260, people say that the Ashly digital have a nice limiter, but they are around 999, i was looking maybe at a MINIDSP, no matter that you need a PC to tweak it, once is set is set it and forget it

Thanks for sharing , that XTA pdf is pure gold!! never seen that detailed setup instructions for limiters, and btw, prices for drivers now are trough the roof, i wish have seen this thread in 2019

I just found this thread and get hooked in to it! , i have a couple of questions tough, is it possible to modify a little to fit 2 12" drivers or 4 8"? , take my questions with a grain of salt or 2 i dont have any sub design knowledge budget 18" drivers like the 18TBX100 possible ? does anybody had tested the clones like Sanway, sinbosen and CVR https://www.ebay.com/itm/275253000470?epid=12031073806&hash=item40165b7916:g:MHcAAOSwrY5iS0mr Best. Rolo.