Leimahmood

On 2/9/2019 at 3:21 AM, Ricci said:

I don't have a single version of the Skhorn style of sub done. I'm going to work on it again soon but it will probably take me months to get the SW's design and prints done and it may not be what you are looking for anyway. It's not supposed to be a HT sub.  I wouldn't wait on it.

what will b good for me

dayton um18 or 21sw152 is fine

here in our country both price are equal

1 hour ago, Father Francis said:

I’ve never really seen, any need for putting subs more than 50cm from the wall if they are not ported in the back , 

so u mean its not a big deal or problem right

9 hours ago, Father Francis said:

Since you want to use them for HT , i’d Use pipe 6” make it longer than the  measurements, I put up , that way you can cut off while testing, I have 12 *21” tuned @25 hz with a shorter port length , they are for pa use so I didn’t need them going lower.

my room is 13.5feet wide 15.5feet lengthy 8 feet high mention on first post

i often noticed when i put my old subwoofer 3feet ahead(subwoofer front from wall; not back side of subwoofer box) from front wall the bass response gose very flat which i dont like can i use the box depth like old subwoofer 18inch 

3 minutes ago, Father Francis said:

Yes that’s tuned at around 18-20 hz 

for port pvc pipe or wood ports like marty design box is good which one u like most

31 minutes ago, Ricci said:

I don't have a single version of the Skhorn style of sub done. I'm going to work on it again soon but it will probably take me months to get the SW's design and prints done and it may not be what you are looking for anyway. It's not supposed to be a HT sub.  I wouldn't wait on it.

do they work good on sealed box

i have jbl mr918 pair on rmx5050 i used 30hz filter and i like that

but i m sure othorn is way better then these jbl mr918

seal box will need tons of power watts

can u plz suggest me a box size that is better for these driver

i most like the punchy bass that hit the chest 

if i make othorn box and filtered it to 30hz do they give me respons to 20hz in my small room.

12 hours ago, Father Francis said:

Cabinet dimensions are 24” (W) X 32” (H) X 32”(D). 5”port 26” long , i haven’t simm’d that but you could start there 

what is the tune of this box 20hz?

6 hours ago, Ricci said:

It should be fine powering 2 21SW152.

For HT in a home you may want to build a simple ported box with a tuning in the 15-20Hz 

on uper post a member mention that u working on a single driver version skhorn so actually my mind was on skhorn

i have zero idea with building my own box how to calculate driver space and make a box

can u plzz make a box size for this driver which tuning u think is fine fir these

i have no problem with big box thanks

do rmx5050 will do a good job on othorn

two single loaded

mean two sub with one in each b&c 21 driver

i have qsc rmx5050 

looking for dual sub

hey every one

will get soon a pair of b&c 21sw152 4ohm drivers

i m looking for a good box design to use it for home theater specially for movies

solid punchy with good low basses

my mind was on othorn 

but most of ppls saying othorn is not good for ht use

my room size is 13.5feet wide 15.5 feet length 8 feet high

any hlep and advice will be appreciated thanks