NiToNi 0 Posted June 5, 2020 Report Share Posted June 5, 2020 Has anyone measured the complex inductance parameters (Re, Leb, Le, Rss, Ke) of the 8 ohm version of the 21DS115? I find that simulating in Hornresp using these changes the response quite a lot. Quote Link to post Share on other sites
Kyle 102 Posted June 18, 2020 Report Share Posted June 18, 2020 I would not expect it to be significantly different than the 4 ohm. If anything, a bit better (in the direction of less inductance that is.) Reason for that is you typically drop wire cross section going from 8 to 4 while keeping the same number of layers. The gaps on the 8's are normally tighter as a result. Quote Link to post Share on other sites
Colezy12 0 Posted July 21, 2020 Report Share Posted July 21, 2020 What would anyones thoughts be on running 4 of these drivers from a SAE pcm20 amplifier? Thanks Quote Link to post Share on other sites
Ricci 939 Posted July 22, 2020 Report Share Posted July 22, 2020 23 hours ago, Colezy12 said: What would anyones thoughts be on running 4 of these drivers from a SAE pcm20 amplifier? Thanks Should work fine with 4 8ohm drivers. Quote Link to post Share on other sites
Colezy12 0 Posted July 24, 2020 Report Share Posted July 24, 2020 On 7/23/2020 at 7:15 AM, Ricci said: Should work fine with 4 8ohm drivers. Cheers, thanks heaps! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.