Jump to content

Father Francis

  • Posts

  • Joined

  • Last visited

  • Days Won


Father Francis last won the day on February 13 2019

Father Francis had the most liked content!

About Father Francis

  • Birthday September 17

Profile Information

  • Location
  • Interests

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Father Francis's Achievements


Member (2/11)



  1. And why would you think that ?, I think there’s only 9mm difference in the depth, and the box is half the Skp which is designed from Ipal, so I wouldn’t think there is any problems
  2. ok bruv got you I can see the difference https://www.powersoft.com/en/products/amp-modules/m-drive
  3. try check the DigiMod 3000PFC+3000AMP with this you can use DSP-D and DSP-4 and add the big heatsink , https://www.powersoft.com/en/products/amp-modules/digimod-3000pfc i guess this would run you a pair
  4. where do you find your prices?
  5. Try make some jigs to help you do some , of the repeat and alike holes and stuff saves you alot of time and gives you good practice too .
  6. Cool am thinking 🤔 the same cause I have to get the top away from one ears and above the head kind of , will sure put up some nice pics , we just moving into a new workspace, I love bass would like 16 of these . 🔊🔊
  7. Hey boss that’s not a problem it’ll work in that cab pm me your mail i’l Send you something
  8. the 54cm is the port length 63,6cm is the width of the box there 4cm from the front of the side panels cause this is for pa use so there are grills . you can send me your mail and I'l send you some more detailed drawings , if you have a problem overstanding this one
  9. I hope you can see ,I can see the port size is missing it's 22cm wide/high whatever you want to call it
  10. now that all depends on you the SW152 can handle more shit than the DS115 , I'l try get time draw something out for you to make thing abit easier
  11. I’ve never really seen, any need for putting subs more than 50cm from the wall if they are not ported in the back ,
  12. Since you want to use them for HT , i’d Use pipe 6” make it longer than the measurements, I put up , that way you can cut off while testing, I have 12 *21” tuned @25 hz with a shorter port length , they are for pa use so I didn’t need them going lower.
  13. Yes that’s tuned at around 18-20 hz
  14. Cabinet dimensions are 24” (W) X 32” (H) X 32”(D). 5”port 26” long , i haven’t simm’d that but you could start there
  15. The pics I put up was a tec’no party we did a few weeks back 2*21”br running only to 50hz per side 3*115martin per side and two Res3sh F1 , sounded great ,
  • Create New...