dsl1
-
Posts
69 -
Joined
-
Last visited
-
Days Won
15
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Articles
Media Demo
Events
Everything posted by dsl1
-
Glad someone is still doing nuts things.
-
Happy to put some money / dev resources in to support as well. @Ricci @Kyle
-
It happens, they were down to $422 April 2018 on Amazon and I bought them. The price immediately went back up after I purchased the couple that were available.
-
5 Sheets of 18mm and 1 Sheet of 12mm was enough for TWO Skrams cnc'ed. Sheet 1 - 18mm: Sheet 2 - 18mm: Sheet 3 - 18mm: Enough driver panels for 6 subs... Sheet 4 - 12mm:
-
Those were just my personal CNC files. Ricci had issues uploading his. File names won't match the PDF and sizes are going to be a bit different because of dados / rabbets. If you're cutting with a CNC, it does fit together with my files I'll put together an actual cutsheet DXF at some point.
-
Set the document as metric when you import. Can export as IPS from Apsire if your CNC is setup for that.
-
David is where I got mine from. Sorry about that huge order!
-
They've been done but haven't had a chance to run them. Failing over here. Life has been busy
-
I have ipals in the skhorns. The 152's were left over and sitting in a box.
-
After your Skhorns started using these: If those spin you have a much bigger issue...
-
@Ricci - driver bolting was actually quite easy on this one. My impact driver fit nicely under the brace and the handles aren't in the way of the bolts. I did not try putting the driver in with the handles already attached, but you should be able to do it.
-
Tried some white duratex. Kind of cool. Two boxes are done. Driver fits! May put one more coat of duratex on. The white doesn't cover as well.
-
Yes, the knobs are fully recessed. Worked out quite nicely.
-
Lol, that is close. Did you have to cut anything to make it fit? The back mount ended up working nicely.
-
Looks great! I have two all glued up and ready for round-overs + painting, but this weekend got away from me. Maybe tomorrow night.
-
If it's sitting in a room, doesn't matter. Just cuts weight a bit.
-
Got one all glued up. Second soon.
-
I wanted to get it done two weekends ago but the CNC was having issues Everything is cut now except the reverse side handle cutouts and the feet/stacking situation for a pair. I still don't have a good plan there.
-
Finally had an afternoon to cut some stuff.
-
Sweet, maybe I can build one or four this weekend then.
-
@Ricci help this poor guy out.
-
Building the hype.
-
Yay
-
I'm glad it's not any bigger...
-
You already have a couple of those right? Any measurements comparing them to the SW152's?
