Jump to content
Ricci

Stereo Integrity SHS-24 Testing & Discussion

Recommended Posts

Here is what the response for the sealed SHS-24 in 300L (10.5 cu ft)  would be and the excursion profile at 126.5 volts, which is the maximum for the SP1-6000. Specs are based off of what I measured from my D2's but scaled for D1's so the impedance is correct. Semi inductance specs are used. Basically this is a 28" cube. As you can see this looks nothing like winisd. I'd suggest learning HornResponse if you are serious about designing speakers. I wouldn't worry about the excursion passing 50mm below 4Hz. No driver is linear with power out to that level and content that low in freq is very unlikely to ever be full power. Also  the Torpedo amps have a 3Hz 1st order high pass anyway, which most amps do. 

 

 

 

SHS-24 300L Sealed.png

SHS-24 300L Sealed excursion profile.png

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...