Jump to content
Ricci

Equipment for sale

Recommended Posts

January 2016

Updated for sale list...

I'm in the Louisville  KY metro area. No international shipping.  All equipment is used and may have a few cosmetic blemishes, etc... but is otherwise in correct functional shape.

2 RE AudioXXX 18d2's

Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $550ea shipped or $450 each local pickup. I will drive a bit to meet.

post-5-0-17891600-1453214539_thumb.jpg

post-5-0-56314700-1453214549_thumb.jpg
 

 

Chane Audio SBE-118 and a Chane VBE-118.

Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup only. $175 each. I will drive to meet.

BMS 18n862 18's.

1 pair. Low distortion with excellent all around performance. Little bit of oxidation on the motors. $450 each shipped. $400 each local pickup.

post-5-0-18946600-1453214561_thumb.jpg

post-5-0-60759800-1453214566_thumb.jpg

 

B&C 21 IPAL's.

1 pair. Barely used at all. $900 each shipped. $825 each local pickup. Will drive to meet.

post-5-0-55979200-1453215580_thumb.jpg

post-5-0-62065800-1453215537_thumb.jpg

post-5-0-74211600-1453215551_thumb.jpg

 

SOLD!!! TC Sounds LMS 5400 18. SOLD!!!!

Working condition. This one has a surround glue joint which has been repaired. The surround detached from the cone after heating up in the summer sun. Has been re-glued with Loctite 416 rubberized glue. It is NOT pretty but it functions 10/10. The measurement data for the LMS driver posted here were taken from this driver AFTER it was repaired so rest assured it functions just fine. Will post a few pics when I get a chance. Would be a good choice if the driver is to be downfired, behind a grille, or in a horn. Have the original packaging. $650 shipped. $550 local pickup. Will drive to meet.

 

post-5-0-93778900-1453215587_thumb.jpg

post-5-0-43139300-1453215591_thumb.jpg

post-5-0-35190200-1453215584_thumb.jpg

SOLD!!!!

 

Rockford Fosgate T3S2-19.

Basically new. Bought and tested. Factory packaging. $1350 shipped. $1250 local pickup. Will drive to meet.

post-5-0-94756900-1453214880_thumb.jpg

post-5-0-62904000-1453214889_thumb.jpg

post-5-0-43475300-1453214872_thumb.jpg

 

 

SOLD! Dayton Audio UM18-22 SOLD!

New in box. Never even opened the packaging yet. $240 shipped.

post-5-0-97947100-1453214669_thumb.jpg

post-5-0-17005100-1453214680_thumb.jpg
SOLD!

Share this post


Link to post
Share on other sites

The 5400 just got bought and the Dayton UM18 is gone.

 

Still available.

 

BMS 18N862's

B&C 21IPAL's

RE Audio XXX 18d2 v2's

Rockford T3S2-19

Chane SBE-118

Chane VBE-118

Share this post


Link to post
Share on other sites

Hey Ricci, you mentioned the xxx would perform better in a larger sealed.  What size did you have in mind?  I'm helping out a friend with a nearfield sub and am hoping to use one of these little fellas you have here.  

Share this post


Link to post
Share on other sites

I'd go no lower than 8cuft (also slightly depends on split-coil or overhung version) but I'd shoot for 10-12cuft at the least.

It's for the overhung version he has for sale above and It needs to get up to the back of the middle of the chair sitting on a riser, so that is perfect.  And no, Scott, an ass-fire riser mounted sub is not an option!   :D  We are debating less sub and small amp vs. beastie sub and big amp.  He just wants the one driver so the xxx is my first choice for the price.  

Share this post


Link to post
Share on other sites

The overhung version has quite a lot more motor force than the split coil so it works in a smaller box. It doesn't model like the split coil version. 6 to 8 cubes should be just fine.

Share this post


Link to post
Share on other sites

I'd go no lower than 8cuft (also slightly depends on split-coil or overhung version) but I'd shoot for 10-12cuft at the least.

 

 

Hey Ricci, you mentioned the xxx would perform better in a larger sealed.  What size did you have in mind?  I'm helping out a friend with a nearfield sub and am hoping to use one of these little fellas you have here.  

 

 

The overhung version has quite a lot more motor force than the split coil so it works in a smaller box. It doesn't model like the split coil version. 6 to 8 cubes should be just fine.

 

 

That's really good to know. I was dumping all a sanway clone could give to my pair of split coils in 8 cuft boxes and they just laughed at it and kept asking for more. It's good to see they remedied that somewhat with the overhung design. 

Share this post


Link to post
Share on other sites

Sold!

 

Any one interesting in getting into immersive audio?

 

I've got an item for sale.

 

In like-new condition. Includes everything with original box. Trading up on this 6 month old unit to the Yamaha CX-A5100. Works great, sounds great!

Product information: http://usa.yamaha.com/products/audio...a3050_black_u/

Only six months old. Has all the modern bells and whistles including 7.1.4 support for Dolby Atmos. DTS:X update due in March 2016.

Still goes for ~$2,000 new. Asking $1,400 shipped to the lower 48 states. Accepting Paypal, no fees required.

Share this post


Link to post
Share on other sites

I have 4 BNIB TC Pro 5100's Never fired up!

 

Was planing to keep these for a while but its time to give the up now. These are the drivers I helped design while I worked at TC Sounds and are some of my all time favorite woofers! I would like to get 1k for each.

 

5100_drivers.png

Share this post


Link to post
Share on other sites

MAY 2016

Updated for sale list...

I'm in the Louisville  KY metro area. No international shipping.  All equipment is used and may have a few cosmetic blemishes, etc... but is otherwise in correct functional shape.
 

 

Aurasound NS18-994-A

Bought last year. Tested. Needs a good home. Good condition.  $450 shipped or $400 local pickup. I will drive a bit to meet.

 post-5-0-03958800-1462822244_thumb.jpg

post-5-0-08474200-1462822254_thumb.jpg

 

SOLD!!! JL Audio 10W3v2 SOLD !!!!

Pulled out of my stealthbox in my Jeep WJ. Needs a good home. Good condition.  $40 + shipping or $40 local pickup.

 

2 RE AudioXXX 18d2's

Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $475ea shipped or $400 each local pickup. I will drive a bit to meet.

post-5-0-17891600-1453214539_thumb.jpg

post-5-0-56314700-1453214549_thumb.jpg

 

SOLD!!! Chane Audio SBE-118 and a Chane VBE-118. SOLD!!!

Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup preferred. $100 each! I will drive a bit to meet provided gas is covered. Someone PLEASE take these! I'll ship these if someone pays the shipping! Does anyone know a broke, young or otherwise financially strapped person who can't afford much? This is basically charity at this point. Anyone know of a struggling audio enthusiast in need? 

BMS 18n862 18's.

1 pair. Low distortion with excellent all around performance. Little bit of oxidation on the motors. $450 each shipped. $400 each local pickup.

post-5-0-60759800-1453214566_thumb.jpg
post-5-0-18946600-1453214561_thumb.jpg
 
 

B&C 21 IPAL's.

1 pair. Barely used at all. $850 each shipped. $750 each local pickup. Will drive to meet.

post-5-0-55979200-1453215580_thumb.jpg
post-5-0-74211600-1453215551_thumb.jpg
post-5-0-62065800-1453215537_thumb.jpg
 
 

RF T3S2-19

No longer for sale. I'm keeping my baby.

  • Like 1

Share this post


Link to post
Share on other sites

2 RE AudioXXX 18d2's

Two left. Both are the overhung version 2 which has much higher motor force and the RE logo. $475ea shipped or $400 each local pickup. I will drive a bit to meet.

 

 

 

 

Chane Audio SBE-118 and a Chane VBE-118.

Both are passive cabs with a single Eminence built 18" driver. SBE-118 is sealed (Roughly 22" cube) the other VBE-118 is slot vented and tuned to the 17Hz range (Roughly 23x23x36"). Local pickup preferred. $100 each! I will drive a bit to meet provided gas is covered. Someone PLEASE take these! I'll ship these if someone pays the shipping! Does anyone know a broke, young or otherwise financially strapped person who can't afford much? This is basically charity at this point. Anyone know of a struggling audio enthusiast in need? 

 

Awesome offers on these B)

 

It's a shame there's a rather large pond in the way as I'm sure I could find the money and a home for the latter!

 

 

 

 

JL Audio 10W3v2

Pulled out of my stealthbox in my Jeep WJ. Needs a good home. Good condition. $40 + shipping or $40 local pickup.

 

Hmmm...  I have one of these sitting in a small sealed boombox that used to be in a car...

 

I wonder if I could make a small PPSL if I bought this one? I recall they sounded pretty good...

Share this post


Link to post
Share on other sites

 Hmmm...  I have one of these sitting in a small sealed boombox that used to be in a car...

 

I wonder if I could make a small PPSL if I bought this one? I recall they sounded pretty good...

 

Yeah mine served faithfully for many years on an amplifier with about 3x the rms rating of the driver. Still works fine. Not a bad driver at all. It just isn't worth much. I'm trying to find homes for all of this equipment I've got collecting dust.

Share this post


Link to post
Share on other sites

Ricci I need your contact info. I know a guy in Eberfeld IN who will take both your Chanes and your JL sub.

 

He will contact you and make arrangements to have hen picked up tomorrow :)

Share this post


Link to post
Share on other sites

No worries mate. I'm slightly jealous of my buddy for getting them lol.

 

I take it they got picked up today?

 

He had everything on hand by Saturday night. Some serious team work on that sale, with 4 parties involved. Went super smooth.

  • Like 1

Share this post


Link to post
Share on other sites

^yeah he sent me pictures of em later that day.

 

He's got em sanded down and repainted already lol...

 

I will prob be headed down there in a few weeks myself for a unrelated sub project and look forward to seeing/hearing them!

 

PS I'm currently passing through Louisville ironically enough

Share this post


Link to post
Share on other sites

I have 4 BNIB TC Pro 5100's Never fired up!

 

Was planing to keep these for a while but its time to give the up now. These are the drivers I helped design while I worked at TC Sounds and are some of my all time favorite woofers! I would like to get 1k for each.

 

5100_drivers.png

 

 

 

Lowering price to 900

Share this post


Link to post
Share on other sites

Dangit I wish I had the funds for these Kyle. Would love to have a pair of these. I was hoping to own a pair of these in the future. Seems like a perfect driver for my own personal wants. I hope you sell them but I am also hoping you have a pair of them down the road still. :D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×