Leimahmood

So box dont need any eq just need now room eq right ??

i have four skram box in my theater room and two port block tune to 20hz iss there any specially eq needed the driver used is b&c 21SW152 4ohm

Hi every one. i have some jbl 2279h drivers 18inch is it useable for home theater 20hz bass or 25hz box like marty Here are the specifications

i have one pair of skram box with b&c 21ds115 4ohm So now i purchased some lavoce 21 drivers so thinking for ckram

is there any cnc cut list for mdf sheet 4feet x8 feet

For movies Skram vs ckram Which one is good

Hey every one hope every think is going well Do 8x stereo integrity ht18 v3 (marty box) Perform well then The 4x lavoce 21inch (devastator) subwoofers Room size 17 feet wide and 21 feet length and 12 feet high dedicated for home theater How the mid and ultra low basses of 8x 18s compair to 4x 21s Only for movies Thanks

Any one have 8x4 feet 18mm mdf sheet file for cnc machine for skhorn kindly share bcz here in our country there is no plywood 5x5 feet thanks

Logitech z5500 driver vs polk audio hts10 woofer What a shame polk

here in our cuntry only mdf avilable and the size is in pic and can i make skram with this size mdf

if i make a mbm type box iss it fine

well ricci my main need is 30hz and up to 120hz i need tiet punchy basses for ultra low i use an other subs drivers

well i m not ture 20hz lover i need good punchy bass recently i make a box its 18cubic feet 16hz tune it good around 15 to 70hz but after that its show lack mid basses like from 80 to 120 so that y my eyes on skram and i have a pair of 21ds115 4ohm room is 13.5feet wide x15.5 lengthy x8high and fully seal room no window etc